@Orik Manufakchɔri        marketing@oricsystems.com/marketing@oricdigital.com
Yu de ya: Os » DTF Power
6
5
4
2
1
B .
C .
E .
D na di .
wan
DTF hot melt paoda
speshal fɔ dtf printin .

Klasifikɛshɔn .

Soft DTF paoda, rough DTF paoda, anti-stretch DTF paoda, anti-sublimation DTF paoda, DTF paoda we de blo

Tin

DTF pauda dɛn na spɛshal wan fɔ yuz wit DTF printin. Di paoda de insay 1 kg, 5 kg, 20 kg, ɛn 25 kg. Dɛn sheb di tin dɛn we dɛn pak insay bag ɛn barɛl dɛn.

Di fil fɔ klos dipen pan di kayn paoda we yu de yuz ɛn di tik we yu ink layt gɛt. Wi soft en stretchy DTF pauda get beta han pas tradishonal vinyl o oda kain heat transfer. I elastik ɛn soft to di tɔch.

Wi DTF pauda dɛn kin drɛy sloslo ɛn i izi fɔ kol-tia. Dis rivɔlɔshɔnari tɛknɔlɔji go ɛp yu fɔ gɛt fayn fayn transfa printin rizɔlt dɛn.
 
  • Teknik spesifikeshɔn dɛn .

Sayz: 30cm/60cm/120cm*100m, A3, A4
Ɔl tu di sayd dɛn Mattee Coating
Smooth ɛn klin sɔfays
tik
de aplay ink: pigmɛnt ink
skrach resistant, nɔ-fan, wasable
nɔ-slip, nɔ gɛt ɔyl, nɔ de stik,

,
we  izi
fɔ  peeld
6  90μm Hot film,
 Performance aswarm film
 Performance Ascold film.

Fɔ hot fim, di we aw di pɔtn ɛn di klos patɛn de apia na mɔ natura we tear film ɔf wantɛm wantɛm afta dɛn print am.
Fɔ kol fim, di we aw di patɛn de apia na smɔl smɔl, bɔt di sɛns fɔ peint ɛn lɛda kin wɔs we di tɛm we dɛn kin kɔt di fim nɔ kin pwɛl afta di tɛmpracha dɔn.
  • Pauda Klasifikɛshɔn:

Na kɔs 80 mesh, midul 120 mesh, fayn 200 mesh, wi kin mach di spɛshal aplikeshɔn akɔdin to di kɔstɔma rikwaymɛnt

 Wash mak wit smɔl wɔd dɛn kin mach fayn paoda ɛn hot fim.

 Big eria patɛn kin pik wam ɛn kol film ɛn kɔs paoda.

 Fɔ di jenɛral patɛn, hot mɛlt glu paoda we dɛn kin advays fɔ  
   pik midul - fayn paoda.

 Nɔmal wan, dɛn fɔ sial hot mɛlt paoda, fɔ mek dɛn nɔ afɛkt  
    di yus ifɛkt we shek paoda gɛt.

 Bikɔs ɔf di difrɛns pan printa, ink, ICC kɔv fɔ bod ɛn sabstret fabrik fɔ ɛni yuza, wi kin divɛlɔp wan pafɛkt ɔt transfa fim plan dɛn akɔdin to wi yon kɔndishɔn.

 If di film safa absɔb mɔs ɔ dɔst we kɔmɔt frɔm lɔng tɛm ɛksplɔshɔn, di sɛkshɔn we de na do fɔ kɔt ɛn afta dat dɛn print am bak, fɔ mek wi nɔ afɛkt wi jɔjmɛnt.
     Handle di film jisnɔ, avɔyd kɔmpreshɔn ɛn kɔntushɔn, pe atɛnshɔn to di trɛnk  
     ɛn angle we yu de kɔt di fim, fɔ mek yu nɔ mek dip skrat.
 
 Superior soft han fil         big wash resistans         strɛchabiliti
Klasifikɛshɔn . Tin
Soft DTF paoda . patikyula saiz 80-170um, izi fɔ mɛlt, saf ɛn smol afta di transfa, we fit fɔ smol ɛn flat fabrik, lɛk t-shirt, sweta, sweta, polo shirt
Rough DTF paoda . patikyula saiz: 120-250, izi fɔ mɛlt. Afta dɛn dɔn transfa, di an fil klia wan. I fayn fɔ mek dɛn mek rɔf rɔf klos dɛn, lɛk denim, klos dɛn we dɛn nɔ mek wit klos, ɛn linin.
Anti-strech DTF paoda . Dis paoda rili fayn ɛn izi fɔ mɛlt, di transfa dɔn prodak nɔ de strɛch, ɛn i fayn fɔ strɛch fabrik
Anti-sublimeshɔn DTF paoda . Dɛn kin yuz am fɔ blok klos kɔlɔ ɔ patɛn we pɔsin kin si tru transfa. I izi fɔ mɛlt, i fayn fɔ dak klos dɛn .
DTF paoda we de blo . DTF paoda we de blo de gi yu wan print we de blo mɔ wit wan smol fil ɛn saf saf we yu de blo
Testing kondishon:
Transfa Tɛmpratura: 130-160°F Transfa tɛm: 8-15 sɛkɔn
Bɔt di envayrɔmɛnt:
Fɔ mek dɛn ebul fɔ protɛkt di fim we dɛn nɔ yuz, i fayn fɔ kip am na in ɔrijinal pak, insay di poli bag, na 68°F–82°F (20°C–28°C) ɛn 40–60% RH.
Bɔt di say we dɛn de kip tin dɛn
:
Kip fa frɔm mɔs, sial di bag insay di tɛm afta yu opin .
Bɔt Print:
Di pepa de wund rawnd di pikchɔ sayd. Printing de du insay wan 'Mirror' pikchɔ. Alaw di printin ink fɔ dray bifo yu transfa am.

Di we aw dɛn de du am ɛn di tin dɛn we dɛn fɔ du .

 
1、Di patɛn we dɛn fɔ aplay tru Fɔtoshop ɔ ɔda imej prɔsesin softwe fɔ kɔmplit di prɛprosɛsin, dɔn input insay di dijital printin softwe.

2、Di printa fɔ mek di bɛst mach bitwin di kɔnsumabl dɛn lɛk di  
maching hot transfa fim, ink, ɛn imej kala ICC ɛn di softwe. Di patɛn we dɛn print gɛt garanti fɔ brayt ɛn stebul.
Printin humidity kondishon fɔ de 50%-60%—
 Indo tempɔret fɔ de 20-30°C-
 Di tɛmpracha fɔ printa riya ɔt bɔd fɔ de 38°C~45°C.

3、Afta yu print di patɛn, lɛ di fim flɔ insay di ɔtomatik pauda shek mashin.
Bikɔs ɔf ink ɛn ɔda rizin dɛn, duya pe atɛnshɔn to klaymat chenj, wi kin tɔn na di frɔnt ɛn riya itin fɛnshɔn fɔ mek shɔ se stebul kwaliti de we di tɛmpracha nɔ bɔku na di winta.Baking mashin we dɛn kɔnɛkt ɔt bɔd dɛn kin advays bak to 40-50 digri.

4、Jɛnɛral, di baking spid afta yu shek paoda fayn fɔ mach di printin   
spid. Di tɛmpracha na di bɛst fɔ wam fɔs ɛn afta dat i kin wam. I fayn fɔ       
kɔntrol di tɛmpracha na di fim sɔfa bitwin 70 ɛn 90°C.

5、Afta bak, di fim we dɔn dɔn wit patɛn fɔ print pan di surface fɔ         
sabstret klos ɛn ɔda matirial dɛn bay ɔt transfa printin mashin  
as ali as i pɔsibul.
 Hɛt printin tɛmpracha: 140-160°,  
dɛn kin ajɔst am bay di fizik prɔpati dɛn we di ɔt mɛlt paoda gɛt;
 Ɔt printin tɛm: 7sek to 10se;
 Hɛt printin prɛshɔn: 5--7kg;
 Akɔdin to di difrɛn fabrik maching .

  • Ink Flɔ .


    Rizin

    1、I kin bi izi fɔ flɔ ink usay gɛt pauda impurities ɔ krash wund 2、Di ɔt bɔd nɔ opin afta printin  

    sɔlvushɔn

    if di ink flɔ na bikɔs ɔf di po absɔpshɔn, wi kin tray 1, ridyus di prɔpɔshɔn fɔ wayt ink sɛtin, aprɔpriet fɔ ridyus di amɔnt ɔf wayt ink 2, inkɛst ink 2, bɔd it kin ɛp ink 3, bɔd it kin ɛp bak fɔ mek di pas 2, bɔd it kin ɛp bak fɔ mek di pas 2, go bifo bak.

  • paoda shek we nɔ klia .

    Rizin

    wet wet, humidity, strɔng statik ilɛktrishɔn, i nid fɔ chɛk we di edj fɔ di patɛn nɔ klin.
    1、 If ay humiditi ɔ lɔw tɛmpracha                
    2、If di trɛnk fɔ paoda shek mashin nɔ rich              
    3、If di printin intaval tu lɔŋ if dɛn nɔ gɛt paoda we dɛn kin kɔz bay we dɛn de drɛy glisrin difyushɔn                             
    4、 ilɛksɛf ink misting pan ed

    sɔlvushɔn

    if dɛn si se di prɛshɔn wil pozishɔn ɔ tu fayn, yu kin tek am na di rayt we fɔ mek dɛn gɛt am na di rayt we fɔ mek dɛn gɛt am, di prɛshɔn ɔ tu fayn, i fɔ tek di prɔblɛm ɔ tu fayn, yu kin tek di prɔblɛm ɔ tu fayn, yu kin tek am se i fɔ bi di rayt we fɔ mek dɛn gɛt di prɔblɛm ɔ tu fayn.                
    Jɛnɛral wan, if yu inkrisayz di tɛmpracha na di ɔt bɔd afta yu dɔn print ɛn shek paoda mashin kɔnɛkt bɔd, dat kin mek di ed paoda shek nɔ klia.

  • Pauda ol dɛn .

    Rizin

    ink wata ɛn glisrin bɔylin ɛvapɔreshɔn wit ay tɛmpracha ɛn shɔt tɛm baking drɛd, we de pul ol dɛn kɔmɔt na di kɔtin ɛn fim

    sɔlvishɔn dɛn

    i bɛtɛ fɔ gi prayoritɛd to midul ɛn fayn pauda, ​​smɔl kɔs paoda ɔ ivin nɔ kɔs pauda, ​​i kin wok fayn we i kin wok fayn fayn wan we i kin bi bak we i de bak ɛn i kin gɛt lɔng tɛm, i kin wok fayn fayn wan na di lɔw ɛn ay tempɔreteshɔn sɛkshɔn fɔ lɔng tɛm, i kin wok fayn fayn wan na di lɔw ɛn ay tɛmpracha sɛkshɔn fɔ lɔng tɛm, i kin wok fayn fayn wan na di lɔw ɛn ay tɛmpracha sɛkshɔn fɔ lɔng tɛm, i kin wok fayn na di lɔw ɛn ay tɛmpracha sɛkshɔn fɔ lɔng tɛm, ɛn mɛlt glu gud gud wan, bɔt nɔ vaylɛnt riakshɔn. Di fim we kɔmɔt na di fim na fleksibul, ɛlastik, smol ɛn dray. If di paoda mashin bigin wit smɔl po kɔndishɔn, i nid fɔ mek yus to di wok fɔ prɛhɛt di chɔp bɔd fɔ wam ɛn stim sɔm wata bifo tɛm fɔ ridyus di lod, dray dɛn dɔn shek paoda.

  • Oily ɔ damp .

    Rizin

    baking drɛd patɛn ɔ pas ɛn transfa patɛn kin bi ɔyl ɛn damp

    sɔlvushɔn

    I na fɔ di fenomen se di glu nɔ bek fayn fayn wan, di wata ɛn glisrin we de na di ink nɔ kin ebul fɔ bek gud gud wan ɛn afta dat dɛn kin rivɛns am. Jɛnɛral wan, singl shit ɔpreshɔn vɛshɔn wit 120 digri lɔw tɛmpracha fɔ lɔng tɛm tru am bɛst. As paoda de limited bay di   length  of di pauda mashin, so wi kin tray fɔ rayz di kɔnɛkt bod aprɔpriet ay tempɔret fɔ mek di wata ɛn glisrin evapɔreshɔn bifo tɛm kin ɛp bak fɔ ɛp .

  • Pauda we de flak .

    Rizin dɛn

    Di blank ples pauda rawnd di pɔtn stik di kɔtin afta ɔt transfa printin

    sɔlvushɔn dɛn

    kin bikɔs ɔf di ɔt transfa printin prɛshɔn tu ay, we mek di fim ink absɔb layt damej peeling ɔ fabrik sɔfays saiz izi fɔ stik di kɔtin. Jɛnɛral wan, as lɔng as di tɛmpracha ɛn prɛs tɛm kin mit di tin dɛn we dɛn nid fɔ stik fayn fayn wan, i kin izi fɔ sɔlv am we yu ajɔst di prɛshɔn smɔl smɔl as i pɔsibul dɔŋ
Tin dɛn
  • DTF paoda na spɛshal we fɔ yuz fɔ print DTF. Wi paoda gɛt fayn fayn adheshon, fayn fayn washabiliti, ɛn i kin adara kɔrɛkt wan to ink pas fɔ film.

  • dis pauda kin kכmכt na 150C כ 300F εn yu kin pres am fכ 10-20 sekכnd. Pres di transfa we dɛn dɔn kɔmplit bak fɔ 10 sɛkɔn, ɛn put wan pat pan parchment pepa pan am fɔ mek yu fil fayn.

  • Dis paoda kin wɛl insay ɔvin yuz ɔt ɛya gɔn ɔ ɔnda ɔt prɛs.

  • Prɔses fɔ yuz di paoda:
  • 1. Put di transfa pepa pan wan hot-pres pilo ɔ hot-pres fom.
  • 2. Lɔs di tɔp itin plet te i de lɛk 1 cm away frɔm di transfa.
  • 3. Solidiify di pauda na 160C fɔ lɛk 2 minit ɔ te i mɛlt. 

  • Fɔs, i go bi spak spak. Dɔn i go mɛlt ɛn mek wan flat say.
Rid mɔ bɔt dis
Rid mɔ bɔt dis
Aplikeshɔn dɛn fɔ . 
DTF printa we de na di .
Prodakt dɛn we dɛn kin yuz mɔ lɛk T-shirt, hat, bakpak, lanyard, shuz ɛn mɔ fɔ mek yunik fashɔn pies dɛn. Yu kin yuz am bak insay denim klos, bag dɛn we dɛn nɔ mek, gift bag, pal klos, besbɔl kap, fabrik gift bɔks, ɛn ɔda tin dɛn Mek yu travul ɔutfit yunik .
 T-shirt                                 Denim/Jeans
Kanvas  Ru                              Hoodies
.  Bakpak                       Lanyards
 Shoes                                Bags
 Baseball                 ​ Gift
​ Caps

DTF Aksesoris .

DTF aksesɔri dɛn we de inkuld DTF tɛkstayl ink, DTF shek paoda ɛn pet fim wit ay kwaliti aksesɔri fɔ DTF printin wit affɔt prayz.
 
DTF pet films .
DTF film kin transfa pan bɔku bɔku fabrik dɛn. I ebul fɔ print to shirt, sweta, hud, pulɔva, kanvas, denim, ɛn mɔ! Wi DTF film dɛn gɛt fayn fayn ink absɔpshɔn fɔ ay-prɛsishɔn printin. Yuz wi fim yu go ebul fɔ gɛt ay kwaliti, briz, ɛn smɔl smɔl print dɛn.
DTF Tekstil Prinitng Ink
DTF Tekstil Print Ink na rili kɔmpitabl wit print Epson ed dɛn. Yu kin print yu dizayn dɛn dairekt wan pan difrɛn tɛkstayl ɛn fabrik dɛn yuz dairekt to film ink teknɔlɔji.Oric de gi difrɛn kɔlɔ dɛn fɔ DTF ink dɛn lɛk W, Y, K, m, c, ɔ, Gr, ɛn bak fluorescence pink & fluorescence yellow.
DTF hot melt paoda .
Nɔ lɛk DTG teknɔlɔji, DTF nɔ nid ɛni prɛ-tritmɛnt.Di tin we impɔtant pas ɔl na DTF pauda. DTF pauda dɛn spɛshal fɔ yuz wit DTF printin prɔses. Wi DTF pauda dɛn kin dray sloslo ɛn izi fɔ kol. we go ɛp yu fɔ gɛt fayn fayn transfa printin rizɔlt dɛn.
Atikul dɛn we gɛt valyu .
01
Di ia warranty .
Insay 1 ia frɔm di de we dɛn bay am, if di mashin gɛt damaj we dɛn nɔ mek, yu kin ɛnjɔy fri warranty savis.
02

Onlayn Tɛknikal Sɔpɔt .
Di ɛkspɛkt tim go sav yu ɔnlayn ɛn sɔlv ɛni prɔblɛm we yu mit fɔ fri.
03
Inkjet printa stater kit kit .
Starter kit pak inklud komplit set of test ink, komon yuz riplesment pats,en di yuza in gayd, installation vidio instrakshon.
04
Dila in tim trenin .
Ɔltɛm gi wi dilɛs dɛn , tɛnki trenin fɔ nyu mɔdel dɛn, aplikeshɔn sɔlvishɔn trenin, sɛl gayd trenin.

Oric Factory na dijital inkjet printin ikwipmɛnt manifakta ɛn sɔlvishɔn prɔvayda fɔ UV -rɔl-rɔl-rɔl/haybird/flatbed)/ sublimatin / eko sɔlvɛnt / sɔlvɛnt / DTF / UV DTF / Tɛkstɔr peint
 
 
Mɔ Printa OEM Savis dɛn
Welkam fɔ go to wi fɔ go to wi .
Prodakt dɛn :
DTF Tekstil Printa .

Sayn ap fɔ wi Letor Nyusleta .

Os

Os

Na bɔt wi

Kɔntakt wi .

Nyuz

FAQ we de na di wɔl.

Lɛf wan mɛsej .
Kopirayt © 2023 Oric Digtial Technology Co.,Ltd. Ɔl di rayt we dɛn dɔn kip.